Four steps, start to finish.
A wheel-set swap is the fastest job. Mounting tires onto the same rims adds balancing time.
- 01
Arrive & check
We confirm the spot, check tread depth and look over each tire before it goes on.
Wheel-lock key ready - 02
Swap
Lift, remove, fit. Tires on their own rims swap straight across.
Wheel-set swap - 03
Mount & balance
If one set of rims carries both sets of tires, we mount and balance in the van.
Tire-on-rim service - 04
Torque & pressure
Lug nuts torqued to spec in a star pattern, pressures set to the door placard.
Re-torque reminder
The same tools as a bay.
Everything a good shop uses, packed into a van that fits a condo parkade.

Smooth at highway speed
Dynamic balancing whenever tires are mounted.

To spec, never by feel
A calibrated click wrench, in a star pattern.

Sensors relearned
So the dash light stays off with the winter set.

Tires onto rims
Fit new tires or switch sets on one pair of rims.

What we need from you.
- A flat, safe spot about one car length plus a door's width
- Condo or office parkade: permission and the van's height clearance
- Your wheel-lock key, if your wheels have locks
- The other set accessible, or already in our tire hotel
After any wheel change, have the lug nuts re-torqued after the first short drive. We'll remind you.
Pick your spot, we'll bring the shop.
Home, office or parkade: tell us where the car will be and we'll confirm a window.
